Feature:
1. DURABLE MATERIAL: The tank transmitter is made of heavy duty 316 stainless steel, which possesses corrosion resistance, good mechanical properties and high strength
2. STABLE AND RELIABLE: The water level sensor is reed pipe, durable and reliable, stable output signal. The tank does not need to be adjusted
3. WIDE APPLICATION: Fuel level sensors are suitable for boats, cars, trucks, buses and marine applications. Suitable for oil level gauge, water level gauge and any liquid without impurities
4. EASY TO INSTALL AND CONNECT: Fuel level transmitter with washer, mounting screw, text and graphic instructions; The wiring instructions are easy to understand. The installation will take a total of about 15 minutes to get your meter working again
5. FOR DIFFERENT TANKS: To keep the transmitter from touching the bottom of the tank, the transmitter length should be in less than the tank depth if it is a plastic tank, or 0.5in less than the tank depth if it is a metal tank
Specification:
Item Type: Marine Fuel Sending Unit
Product Material:
Body: 316 stainless steel
Cable: PVC
Float: NBR
Installation Method: Standard SAE 5 hole type
Screw Size: M5 x 0.8
Hole Diameter: Approx. 5mm 0.20in
Product Specifications: Approx. 275mm 11in
Recommended Tank Size: 285 ~ 300mm 11.2 ~ 11.8in
Output Signal: European standard 0190ohms (0ohms when no load, 190ohms when full load)
Resolution Range: Approx. 21mm 0.83in
Fuel and Water Level Sensor Type: Resistor
Alarm Switch Rated Current: 500mA
Protection Level: IP67
Operating Temperature: 40 Fahrenheit ~ +185 Fahrenheit (40 celsius ~ +85 celsius )
Applicable: Ships, yachts, trucks, RV.
Package List:
1 x Fuel Sending Device5 x Screw1 x GasketDURABLE MATERIAL: The tank transmitter is made of heavy duty 316 stainless steel, which possesses corrosion resistance, good mechanical properties and high strength
STABLE AND RELIABLE: The water level sensor is reed pipe, durable and reliable, stable output signal. The tank does not need to be adjusted
WIDE APPLICATION: Fuel level sensors are suitable for boats, cars, trucks, buses and marine applications. Suitable for oil level gauge, water level gauge and any liquid without impurities
EASY TO INSTALL AND CONNECT: Fuel level transmitter with washer, mounting screw, text and graphic instructions; The wiring instructions are easy to understand. The installation will take a total of about 15 minutes to get your meter working again
FOR DIFFERENT TANKS: To keep the transmitter from touching the bottom of the tank, the transmitter length should be in less than the tank depth if it is a plastic tank, or 0.5in less than the tank depth if it is a metal tank
