Feature:
1. Unique Deisgn: The advantage of this doughnut float type level sender over a thick film swing arm type level sender is the durability and reliability of the reed switch. No need to adjust the tank.
2. Material: All fuel sending units are made of selected reed switches and fixed resistors. SAE 5 hole installation mode, heavy 316 stainless steel, strong structure. Signal output is 240 ohms?33 ohms.
3. Features: The fuel level sensor supports Marine, RV, and truck oil level gauges and tank level gauges, with washers and mounting screws to prevent the sensor from touching the bottom of the tank.
4. Compatibility: If a hole must be drilled, a 1?12in (38mm) Diameter hole would be perfect. The sender has a nonlinear output that can only be matched with a standard meter with a nonlinear signal.
5. Installation Suggestion: If the fuel tank is plastic, the length of the sensor should be 1in2.5cm smaller than the depth of the fuel tank, if it is metal, it should be deeper than the tank 0.51in.
Specification:
Item Type: Fuel Sending UnitMain Unit: 316 stainless steel
Cable: PVC
Float: NBR
Installation: Standard SAE 5 hole type
Screw Size: M5 x 0.8
Aperture: Approx. 5 mm 0.20 in
Product Size: Approx.8in200mmRecommended Water Tank Size:8.39in(210230mm)
Resolution Range: Approx. 21mm0.83in
Fuel and Water Level Sensor Type:Resistance
Alarm Switch Rated Current: 500mA
Protection Class: IP67
Operating Temperature: 40 degrees F ~ +185 degrees F (40 degrees C ~ +85 degrees C)Application:Suitable for boats, yachts, trucks, RVs.
Package List:
1 x Fuel Sending Unit5 x Screw1 x Gasket
Note:
1. This fuel tank sensor is 240?33 ohm, only suitable for 240?33 ohm fuel gauge. Please make sure your product is suitable for 240?33 ohms before purchasing.
2. When the oil level or water level is empty, there will be 3?15mm space between the sensor float and the bottom of the sensor. This is a safe distance and the fuel sender will work fine.3. Please check the size and description of the product carefully before purchasing, if the fuel tank is plastic, the length of the gas tank liquid level sensor should be 1in smaller than the depth of the fuel tank, if the water tank is metal, the length of the liquid level sensor should be smaller than the depth of the fuel tank 0.5?1inUnique Deisgn: The advantage of this doughnut float type level sender over a thick film swing arm type level sender is the durability and reliability of the reed switch. No need to adjust the tank.
Material: All fuel sending units are made of selected reed switches and fixed resistors. SAE 5 hole installation mode, heavy 316 stainless steel, strong structure. Signal output is 240 ohms?33 ohms.
Features: The fuel level sensor supports Marine, RV, and truck oil level gauges and tank level gauges, with washers and mounting screws to prevent the sensor from touching the bottom of the tank.
Compatibility: If a hole must be drilled, a 1?12in (38mm) Diameter hole would be perfect. The sender has a nonlinear output that can only be matched with a standard meter with a nonlinear signal.
Installation Suggestion: If the fuel tank is plastic, the length of the sensor should be 1in2.5cm smaller than the depth of the fuel tank, if it is metal, it should be deeper than the tank 0.51in.
