Coolbe: Informasjon om varen er oppgitt av selgeren. Uavhengig av denne informasjonen har varen ingen forebyggende, diagnostiske, terapeutiske, rehabiliteringsegenskaper, er ikke et legemiddel, skal ikke brukes til medisinske formål og er ikke et medisinsk produkt. Ta kontakt med en spesialist.
-----
Feature:
1. HIGH AIR PRESSURE: The maximum air pressure of airbrush is 18 PSI and the nozzle Diameter is 0.4mm. Easy to penetrate and more delicate without hanging residual drops.
2. LARGE CAPACITY BATTERY: Built in 1200mAh large capacity battery, which ensures longer continuous working time and faster charging efficiency. USB charging interface, convenient and fast.
3. CORDLESS PORTABLE: Small size, light weight and comfortable in hand. It is easy to carry, you do not need to carry a big, heavy air compressor, this airbrush kit can easily fit in your backpack.
4. MULTI FUNCTION: The multi functional cordless oxygen sprayer to meet the multiple needs of your life, art painting, model painting, nail painting, cake decoration, makeup, temporary tattoo, facial hydration.
5. MAINTENANCE METHOD: Just empty the tank, fill it with water or solvent, then block the needle tip with your finger and spray. Air will flow backward into the nozzle and clean the residual liquid.
Specification:
Item Type: Facial Oxygen Injection
Material: ABS
Product Color: Pink
Water Tank Capacity: 5ml, 20ml
Nozzle Diameter: Approx. 0.4mm 0.02in
Maximum Pressure: 18PSI
Battery Type: Lithium battery
Battery Capacity: 1200mAh (Shipped with built in battery)
Power Supply: USB charging
Charging Time: 1-2 hours
Use Time: About 40 minutes
How to Use: Step 1: Check the product and the USB connection cable to make sure there is no damage after removing it from the package.
Step 2: Use the USB cable and 5V 2A adapter to charge the cordless compressor. It takes about 1-2 hours to fully charge.
Step 3: When the red LED light turns green, it means the power is fully charged.
Step 4: Pour the liquid into the tank after proper dilution, this product is suitable for spraying water like liquid with viscosity below 2000mpa.s. Otherwise, the sprayer is easy to clog. Then you can disassemble the USB.
Step 5: Turn on the on, off button of the cordless compressor.
Step 6: For single action sprayer, pull the operating lever of the sprayer back gradually to spray. For double action sprayers, press the lever and airflow comes out, press the lever while pulling back and mist comes out. The shape of the spray mist is consistent with the distance between the work surface and the gun.
Cleaning steps:
Step 1: Pour out all the remaining sprayer paint from the tank.
Step 2: Using the dropper, add hot water to the tank for cleaning.
Step 3: Wipe the tank thoroughly with a cotton swab. Add more water and repeat if necessary.
Step 4: Spray water through the sprayer onto the towel until the towel is clean. Pour off the remaining water and allow to dry.
Maintenance:
1. Empty the liquid tank and clean with water or solvent with a brush.
.
Package List:
1 x Host1 x USB Cable1 x 20ml Water Tank1 x 5ml Water Tank1 x Airbrush1 x Instruction Manual
