About this item:
1.【Design for Oculus Quest 2】：The VR Charging Dock is compatible with the Oculus Quest 2 can charge the Oculus Quest 2 headset and two Touch Controllers simultaneously, saving your time and batteries. Stable and safe charging mode.
2.【Large Charging Capacity】：2 rechargeable batteries with USB-C charging connector specially designed for Quest 2 controllers are included. It is of 1800mAh x 2 large capacity.
3.【LED Display Charging】:It takes 2.5 hours to fully charge and is rechargeable for 1000+ times.3 indicators are on the front panel of the charging dock for Oculus quest 2, showing the status of the headset and that of the two controllers separately. Indicators turn yellow for the "charging" status; indicators turn green for the "fully charged" status or "standby" status.
4.【USB-C Connectors】- The USB-c charger locked into place, when you dock the headset, it's automatically charging. It makes plugging and unplugging a breeze. The charge attachment makes it even quicker to plug in for charging.
5.【All-in-One Set】:1 x Charging Dock, 1 x USB C Charging Cable, 2 x Rechargeable Battery,2 x Battery Slot Cover, 4 x USB Type C charge head, 1 x Head Removal Pin,1 x User Manual.
Product Description:
1.FAST CHARGE - This docking station can charge your Oculus and controllers in around 3.5 hours.
2.COMPATIBILITY - Only useable with the Oculus Quest 2. Will NOT work with an oculus that has a built-in battery.
3.3 IN 1 - Charge your headset and both controllers all in one docking station.
4.SAFE - The docking station will auto turn off once your Oculus is fully charged to stop your device over charging and getting damaged.
Description:
1. When the charging dock is a VR helmet and two handles are charged simultaneously, in order to provide sufficient current, the charging dock must be equipped with a charger with an output of 5V2A or higher. The required charger output is 5V>2A
2. The original charger included in the 0culusQuest2 package is suitable for this charging dock
Steps for helmet charging
1. Connect a 5V2A or higher charger to the charging dock (charger not included in this package, customer needs to purchase separately). The charging dock will light up green and enter standby mode when powered on
2. Insert the Type-C magnetic suction head into the charging hole of the helmet
3. Place the helmet vertically into the corresponding charging position of the charging dock, and at the beginning of charging, The LED indicator light of the seat charger is yellow.
Key Features:
1.LED light indicators.
2.Fast charging.
3.Charge your headset and controllers at the same time.
4.Stops over charging damaging the headset.
Steps for charging the controller
1. Connect a 5V2A or higher charger to the charging dock (not included in this package, customers need to purchase it separately). The charging dock will light up green and enter the power on standby mode
2. Slide the battery cover of the handle downwards and remove the battery cover
3. To install the battery on the controller, please make sure that the Type-C charging port of the battery is facing upwards as much as possible during installation
4. Install the battery cover provided in this package onto the handle
5. Adjust the Type-C charging port of the battery to align with the hole on the battery cover using the needle provided in this package
6. Insert the magnetic suction head into the Type-C charging port of the battery through the hole on the battery cover
7. Place the handle into the corresponding charging position of the charging dock to allow the magnetic suction head to come into contact for charging
At the beginning, the LED indicator light of the seat charger will turn yellow (please note that the handle has a left and right distinction, please place the handle according to the "L" and "R" markings on the seat charger)
If you want to remove the magnetic suction head of the handle, please use the needle provided in the packaging to remove the magnetic suction head
Product Specification:
*Battery type: Polymer lithium battery
*Battery capacity: 1800mAh
*Handle battery usage time: approximately 36 hours
*Charging current: Helmet: maximum 1.4A Handle: maximum 500mA
*Charging time: Helmet: approximately 3.5 hours Handle: approximately 2.5 hours
Seat charging indicator light
*Standby mode: green light
*Charging: yellow light
*Full: Green light
Product size: 27.6*7.7*6.6cm
Item weight: 0.2kg
Package size: 10.8*28*8.3cm
Material: ABS
Package Contents:
Charging dock X1 battery X2
Battery cover X2 USB Type C magnetic suction head X4
Magnetic suction head removal needle X1, 1.2-meter charging cable X1
User Manual X1
