Set Product: 1 universal type tap valve, 1 charging hose with meter, 1 quick coupler for low pressure, 1 conversion adapter
Compatibility: This product is compatible with air conditioning gas recharge sets, R134a, R12 and R22 air conditioning refrigerants
Standards: The total length of this product is 4.9 ft (1.3 m) connected to the charging hose and the quick coupler is 4.9 ft (1.3 m), the maximum allowable pressure of the charging hose is 600 psi, the explosion pressure is 3,000 psi, and the maximum pressure of the meter is 250 psi. Low pressure quick coupler is 1/4" SAE male x 13mm Conversion adapter is 1/4" SAE male and 5/16" SAE female
Universal Type Tap Valve: This general purpose tap valve open commercially available R12 cans and R134a cans. The general purpose tap valve is a type that be fixed to the with a fixed type (side lever) as shown in the picture, and it is not a screw-on tap valve for R12 and R134a cans. With this universal type tap valve, you will need to use the gas in once As a certain amount of gas will leak during use, you cannot store any remaining by closing the tap valve. Just place the clamps on the . A certain degree of leakage is normal. Please do not force it, and it may damage the . Please acknowledge
Pressure Gauge Estimate: Color: Lack of . Need to be refilled Blue: The proper amount of is applied. No need to refill. Yellow: Overcharge Warning Do not fill continuously. Proper maintenance is required. Red Color: is overfilled, proper maintenance is required. Note: There may be differences depending on the car air conditioner, so please refer to the color of the pressure gauge as a guide
We will only accept returns if the item is different from the picture shown
on the product page or is not in the same condition as the product description.
All items are 100% authentic: we verify authenticity before selling.
