Brand：NBSHAN
Power type：USB
Function：Aromatherapy
Voltage：220V
Applicable Area：11㎡ (Including)-20㎡ (Including)
Appearance：round
Noise：36dBthe following
Timing Function：2-8Hours
Water Tank Capacity：0.5Land below
Water Shortage and Power Failure Protection：Yes
Number of Fog Outlets：1个
Color：White
Product Specifications：type-CPlug-in type
Anti-Burn Dry：Yes
Does it support timing and reservation：Yes
Material：Resin
Product Name Flame Aroma Diffuser
Product Number A19
Material Quality： ABS+PP+Electronic Components
Product Size ：260*75*74mm
Color： White
Current： 850-900mA Rated Power 5W
Input Interface DC5V Cup Capacity 260 mL
Use Duration Water Shortage and Power Failure Protection Spray Volume 15-20mL/h
Spray Pattern Continuous Applicable Water Quality Any Water Quality
Product Introduction
Product Standard Color Box、1RiceT-CData Cable、One Manual
Spray Button Operation：
After the Power Cord Is Plugged in，The Light Flickers Three Times，Prompt the User That the Power Supply Is Connected。
1. Short Press Spray Button Open Continuous Spray。At the Same Time, the Seven-Color Rainbow Lights Are on.，Constant Spray Indicator Light on，
2. Short Press Spray Button Again to Switch to Timing2Hour Automatic Shutdown Mode，2HIndicator Light on。
3. Short Press Spray Button Again to Switch to Timing4Hour Automatic Shutdown Mode，4HIndicator Light on。
4. Short Press Spray Button Again to Switch to Timing6Hour Automatic Shutdown Mode，6HIndicator Light on。
5. Press Spray Button Again to Shut down，Including Lights Are Also off，Cycle in Sequence。
Light Button Operation：
1. In the Spray State，Short Press Light Button Can Be Cut into Flame Light。
2. Press the Light Button Again to Switch to Colorful Breathing Light。After Breathing Three Times for Each Color Light，Changing the next Color Light，Cycle in Sequence。
3. Press the Light Button Again to Switch to Colorful Rotation Light。
4. Press the Light Button Again to Fix the Light Color You like。
5. Press the Light Button Again to Turn off the Light。
6. Press the Light Button Again to Restore the Seven-Color Rainbow Light。Cycle in Sequence
Remote Control Operations：
1，Switch button：Press Once to Boot，Press Again to Shut down
2，Timing Button：By Default, the Normal Spray Mode Is Used after Button Is Turned on.，Switch to Timing by Button at a Time2Hour Automatic Shutdown，Motherboard Indicator Light2H.
Timing Button：Press Timing Button Again to Switch to Timing4Hour Automatic Shutdown，Motherboard Indicator Light4H.
Timing Button：Press Timing Button Again to Switch to Timing6Hour Automatic Shutdown，Motherboard Indicator Light6H.
3，Light Button：It Is Consistent with the Lighting Button Function of the Motherboard.
