―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―
🛫【Certified Store on JOOM】
A Japanese seller delivering high-quality products across borders!
📦【Shipped from Japan】
We pack carefully and deliver promptly and securely.
🔍【Strict Inspection Based on Japanese Quality Standards】
Only carefully selected products of excellent quality are delivered.
📒【Japanese Instruction Manual May Be Included】
We recommend using a text recognition app for translation.
👍【If you are satisfied with the product, please "Follow" our store and leave a review!】
Your support means a lot to us 💖
―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―🔹―
[Built-in hyper flash prevention function] Normally, when you change your turn signal bulb to an LED, the difference in power consumption causes the turn signal to flash rapidly, resulting in a hyper flash state. However, this product has a small hyper flash resistor built into the LED, so there is no need for any troublesome hyper flash countermeasures or processing. Just plug it in and you're good to go.
[Optimal brightness and stealth specifications] Ordinary stealth bubbles have low brightness and visibility, but this product compresses the chip area as much as possible to balance brightness and stealth effect, and uses only four 1860CSP chips with high luminous efficiency. Most of the body is silver, achieving a 90% stealth effect. Compared to halogen, the stealth effect is superior. (*Note: Although there are only four chips, a small amount of yellow is still reflected. If you are looking for a 100% complete stealth effect, please consider before purchasing.)
[Beautiful Amber] Clear amber color that meets vehicle inspection standards, the light-emitting position is almost the same as the original bulb. It can provide good performance even in poor visibility conditions. It provides a bright, uniform and natural glow.
[Short size] The total length of the valve is 50.5mm, which is shorter than most products on the market and fits more vehicle models.
[Product Specifications] Base type: T20 single 7440 W21W WY21W (compatible with different pinch parts) / Light color: Amber / LED chip: 1860CSP / Number of LED chips: 4 / Input voltage: 12V / Current: Approx. 1.3A / Power consumption: Approx. 15W / Polarity: Non-polar / Size (approx.): Total length 50.5mm, maximum diameter 20.5mm, socket width 16mm / Warranty: 1 year warranty
◆ Product specifications
Base type: T20 Single 7440 W21W WY21W (compatible with different pinch parts)
Emitting color: Amber
LED chip: 1860CSP
Number of LED chips: 4
Input voltage: 12V
Current: about 1.3A
Power consumption: about 15W
Polarity: non-polar
Size (approx.): Total length 50.5mm, maximum diameter 20.5mm, plug width 16mm
Warranty: 1 year warranty
◆ Built-in hyper flash prevention function
Normally, when you change your turn signal bulb to an LED, the difference in power consumption causes the turn signal to flash rapidly, resulting in a hyper-flashing state. However, this product has a small hyper-flashing resistor built into the LED, so there is no need for any troublesome hyper-flashing countermeasures or processing. Just plug it in and you're good to go.
◆ Optimal brightness and stealth specifications
Ordinary stealth bulbs have low brightness and low visibility, but this product has been designed to balance brightness and stealth, compressing the chip area as much as possible and using only four 1860CSP chips with high luminous efficiency. Most of the body is silver, achieving a 90% stealth effect. Compared with halogen, the stealth effect is superior.
*Note: Although it only has 4 chips, it still reflects a small amount of yellow. If you are looking for 100% complete stealth effect, please consider this before purchasing.
◆ Beautiful Amber
The clear amber color meets vehicle inspection standards, and the light-emitting position is almost the same as the original bulb. It can provide good performance even in poor visibility conditions. It provides a bright, uniform, and natural light.
◆ Short size
The overall length of the valve is 50.5mm, shorter than most products on the market, and fits more vehicle models.
Please note:
1. Please make sure you are sure of the correct application of this valve before ordering.
2. This product is designed for use with turn signal lamps only. It is designed for use with turn signal lamps that flash, so please do not use it for lamps that are always on.
3. When connecting the connector, make sure to insert it all the way in. If it is not inserted fully, the connector may melt and cause a fire.
4. If you have installed LEDs in other places, or if you have installed LEDs on both the front and rear of some vehicles, the hyper flash/ghost light prevention function may not work. In that case, please prepare a hyper flash resistor separately.
5. For vehicles that use a weak current that does not blink with genuine bulbs to check for bulb failure when the engine is started, low-power LED bulbs will blink several times for a few seconds during the vehicle check in response to the weak current. Please note that this is not a problem with the product.
