EVOLUTION GEAR IOTECH Type Holographic Replica Red Dot Sight EXPS3-0 Red/IR (Infrared Emitting) (FDE/CLASSIC (L3 Stamp))

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ----------------------------------------------------------------------

[Clear Vision] Anti-reflective lenses are used to reduce reflections on the lenses, providing a clearer view than conventional EXPS replicas. [Clear Reticle] When you look through the lens, a circular reticle appears clearly. The light intensity can be finely adjusted in 17 steps, making it suitable for a wide range of situations, from dimly lit indoors to bright daylight outdoors. [Super Duralumin Body] The outer shell (outer cover) is made of "super duralumin," the highest class of aluminum alloy, which was also used in the Zero fighter. [Hard Anodized] The surface is hard anodized to resist scratches and corrosion. You can also enjoy the unique texture that dullly reflects light. Made by EVOLUTION GEAR. *Uses one CR123A 3V battery (sold separately). To prevent poor contact, the spring tension in the battery box is stiff. Therefore, the battery cap is difficult to tighten. Please be aware of this beforehand. [Ryohin Buhin: Registered Trademark / No. 6167877] The "Evolution Gear EXPS3-0 Sight" has become a hot topic due to its overwhelming realism compared to conventional replicas. Uses one CR123A 3V lithium battery (sold separately). *We do not recommend using a small CR2 battery as it may go out due to vibration. *The battery cap has a strong spring tension, so it is difficult to tighten. Please note that this is to reduce poor contact at the contact points. [How to turn on the power] Press the light level UP button once (this will turn on the night vision mode). Press the NV button once (to disable night vision and switch to normal mode) Press the light intensity UP button repeatedly to make the reticle appear (when switching to normal mode, press UP repeatedly to start from the lowest illumination). *Night vision mode is an invisible mode that can only be seen through special goggles such as night vision goggles. [CLASSIC (L3 engraved)] It has a marking known as the L3 marking, which is highly popular among holo enthusiasts. Clear reticle The reticle pattern that appears when you look through the lens reproduces the "0 RETICLE 65 MOA ring and 1 MOA dot." This pattern, with a small dot projected in the center of a large ring, is specialized for close-range combat. The reticle is clear and crisp, with no smearing or blurring, allowing for quick and accurate shooting with one or both eyes. Pressing the "NV" button on the side of the unit alternates between "Night Vision Mode" and "Red Reticle Mode." *NV mode uses IR (infrared) as a light source, so it is completely invisible to the naked eye. *This product is a reflex optical device, similar to a red dot sight. It is not a holographic projection device. The lenses used are "reflection-reducing lenses" that reduce reflection. Reflections of the face and background have been reduced, making it easier to use in bright places. The following batteries can be used: 1 x CR123A 3V lithium battery (sold separately) RCR123A 3.7V rechargeable battery (sold separately) x1 [Tips for inserting batteries] *The battery cap has a strong spring tension, so it is difficult to tighten. Please note that this is to reduce contact failure. *The light intensity will decrease as the battery capacity decreases. *If the light intensity is too high compared to the surrounding brightness, the reticle may appear double. In this case, lower the light intensity to resolve the issue. Weight 247g Compatible with any airsoft gun with a 20mm Picatinny rail on top Battery used and lighting mode Battery used: CR123A 3V battery or RCR123A 3.7V rechargeable battery (sold separately) Light intensity adjustment: 17 levels Lighting mode: NV mode/RED lighting [Points to note when purchasing] *As this is an overseas product, there may be scratches or dirt caused during transportation. *Please note that although this is a replica with the highest level of precision and performance, it does not have the same performance or durability as the real thing. *This product is a dot sight, not a holographic sight. *Detailed specifications may vary depending on the lot. Specifications may change without prior notice, such as when changing lots.