Feature:
1. This rubber inlet and outlet wheels are replaced with silicone?coated material, and the rubber outlet is integrated, which reduces the abrasion of the rubber outlet, increases the motor power, and is more suitable for sticky tape.
2. The length of the digital display can be set clearly and easily according to the length of the tape you need. Adjust the length with the plus and minus keys, the "+" key increases the length, and the "" key decreases the length.
3. With initial cutting function, each time you assemble the adhesive tape, because your hand has touched the adhesive tape, the viscosity of the adhesive tape is low or the adhesive tape is contaminated, you can cut off the waste adhesive paper with one click.
4. There is an infrared sensor design next to the scissors, which can save time when one slice is taken out in automatic mode. A machine can be used by 3 people at the same time.
5. With manual automatic 2 modes, you can choose freely, cut 2 rolls of tape at the same time, the light is on, it means cutting in automatic mode.
6. The installation tape is designed without rollers, so there is no restriction on the inner Diameter and outer Diameter of the tape, and it is 100percent satisfied with any inner rubber.
7. Absolute safety design, the first safety design is to design a safety baffle at the scissors; the second safety design is that the machine automatically stops working after the machine is blocked by adhesive tape.
8. Even if the obstruction is removed, the machine will not work immediately, and it will continue to work after pressing the start button again.
Specification:
Item Type: Electric Tape Dispenser.Model: JXD60
Cutting Length Range: 5~999mm
Applicable Tape Width Range: Approx. 6 ~ 60mm 0.2 ~ 2.4in
Applicable Tape Roll Inner Diameter: Unlimited
Maximum Outer Diameter Of Applicable Tape Roll: Unlimited
Cutting Length Error: +1mm
Size: Approx. 116 x 140 x 213mm 4.6 x 5.5 x 8.4in(W x H x L)
Application Range: Acetate tape, protective film, high temperature adhesive, doublesided adhesive, electrical adhesive
How To Use:
1. Turn on the power and start the machine.
2. Load the tape and set the length of the tape.
3. Mode setting, you can choose manualautomaticcyclic mode.
4. Press the start button to start cutting the tape.
Package List:
1 x Tape Cutting Machine1 x Power Cord Plug1 x User Manual
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.This rubber inlet and outlet wheels are replaced with silicone?coated material, and the rubber outlet is integrated, which reduces the abrasion of the rubber outlet, increases the motor power, and is more suitable for sticky tape.
The length of the digital display can be set clearly and easily according to the length of the tape you need. Adjust the length with the plus and minus keys, the "+" key increases the length, and the "" key decreases the length.
With initial cutting function, each time you assemble the adhesive tape, because your hand has touched the adhesive tape, the viscosity of the adhesive tape is low or the adhesive tape is contaminated, you can cut off the waste adhesive paper with one cl
There is an infrared sensor design next to the scissors, which can save time when one slice is taken out in automatic mode. A machine can be used by 3 people at the same time.
With manual automatic 2 modes, you can choose freely, cut 2 rolls of tape at the same time, the light is on, it means cutting in automatic mode.
