Pinlock Seat Shield [RunWind] Anti-fog Sheet, Helmet, Motorcycle, Compatible, Anti-fog (normal)

✅ [General-purpose design compatible with the three major domestic manufacturers] Compatible with the three major domestic manufacturers: Arai, SHOEI, and OGK. It can also be attached to other domestic and foreign manufacturers. *If you ride an SS and use an Arai helmet, the Arai helmet's characteristic inner side duct at the top of the shield makes it impossible to attach the product itself to the top of the shield, so depending on your riding posture, the boundary between this product and the shield may be visible. Please use the pasting mount download service in advance. *Since the spaces between the pins of Yamaha YJ-22 are narrow, we recommend the normal size rather than the wide type. ☑ [Industry's first 3-division method] We have adopted a 3-division method to make it easier to apply and determine the position. By peeling and pasting the center sheet first, you can easily determine the position while holding both sides of the sheet, and then slowly peel off and stick the left and right sheets. When fixing the protective sheet after peeling it off, do not press it so that your fingers slide around it, but press it from above so that it sticks tightly. Also, because the shield is curved, the outer diameter and inner diameter are different. Therefore, by making the "adhesive mount" that is pasted on the outside of the shield larger than the product itself, the probability of failure in pasting has been significantly reduced. *Please check the introductory content video. ☑ [[Anti-fog performance structure] This product has a high anti-fog function, and is effective in bad weather in all seasons, including winter, early mornings and late nights in spring and autumn, rainy season and showers, and provides clear and comfortable visibility. It has a double sash structure, so it is approximately 1mm thick. Please position carefully so as not to interfere with the gasket when opening and closing the helmet. It is not designed to stick tightly like a smartphone protective sheet. ✅ [Demonstration test in Rikubetsu Town, Hokkaido, an extremely cold region] At around 7 a.m. on December 31, 2021, at -23℃ in Rikubetsu Town, Hokkaido, which is said to be one of the coldest regions in Japan, a representative conducted a demonstration test himself and demonstrated the high anti-fog performance. All anti-fog sheet materials are those used in demonstration experiments. ☑ [Illustrated installation guide] If you follow the illustrated installation guide on the back of the package, you will be able to apply it without any mistakes (this product cannot be reapplied). If you are concerned about pasting, please contact support. Our staff who are familiar with helmets will support you. ✅ [Oil Film Removal Sponge] The sponge necessary for removing oil film is also included, so you can install it on the same day it arrives at your home as long as you have a neutral detergent. During use, be sure to remove the oil film before applying this product, regardless of whether it is new. Even if it is new, there may be some small dust or dirt attached, so please be sure to remove it before pasting. (If you paste it without removing it, the adhesive strength of the adhesive tape will decrease and it will be easier to peel off.) *If you have a parts cleaner, we recommend that you use the cleaner to remove the oil film. ☑ [Confirmation Service] We will send the data of the pasting mount to customers who request it. Please use this service to check whether it can be attached to your helmet. *Once you have determined the position of the mount, please return the shield to the helmet, assume your driving position, and check your visibility. The paste position differs depending on whether or not there is a pin lock, so please check the video in the introductory content. ☑ [Using masking tape] The included fixing sticker (included in a black bag) used when pasting the adhesive mount has strong adhesive strength, so if you are not using Clear Shield, we recommend that you refrain from using it and instead use masking tape or other weak adhesive tape to fix it. For colored shields such as mirror shields, the dust removal sticker has strong adhesion and the adhesive may remain or the processing may peel off, so please contact the manufacturer. ✅ [For those using bubble shield helmets] Due to the strong vertical curvature of bubble shields, this product cannot be attached. Please note that this product is not covered by the warranty for failure of pasting. ☑ [Guaranteed installation failure service] We offer a one-time guarantee service for installation failures per order. Please apply using the QR code on the back of the package, so please do not throw away the package until the application is complete. In addition, when applying, you will be required to declare the details of the failure and submit three or more photos. Please note that if we cannot respond to your request, we may refuse the warranty. Introducing anti-fog motorcycle helmets.Full coverage from normal to wide sizes.