For Vw Passat B8 2015 Compatible Chrome Side Door Trim 8 Pieces Stainless Steel

MYTUNING Product Features: Chrome products are molded specifically for the part on the vehicle where they will be applied. Chrome products are produced from A class quality stainless steel. The products are mounted with high quality double-sided acrylic tape on the back. It is sent ready-made. We are guaranteedChrome products; It is covered by a 3 year warranty against rust. Assembly Instruction: 1- Install in a dry and dust-free environment. 2- During installation, the ambient temperature should be between 15C and 35C. environment If the temperature is below 15C, do not dry the surface with a hair dryer etc.. with heating assembly do it. 3- Starting from the oval and closed surface without removing the tapes of the part to be glued. Please try assembly first. 4- Clean the surface to be bonded carefully with a cotton cloth, rubbing alcohol or pure alcohol. clean it. After cleaning the surfaces to be bonded protect from dust and grease. The surface to be bonded should not be oily or wet, such as wet wipes, water, thinner, gasoline, diesel oil, cologne. DO NOT CLEAN with additives. 5- After applying the cleaning process to the surface to be bonded, wait 5 minutes. Then start the gluing process. 6- Remove the protective surface of the double-sided tape on the product and apply the oval and Install starting from the closed surface. 7- During the assembly process, wipe the product with a soft cloth or fingertips. Sit it down by patting it. One minute pressure on the piece and drying the hair again. machine etc. Apply heat using . ATTENTION The tape used will show its full properties within 24 hours. Use the glued part carefully. Paper that you can remove after 24 hours to prevent the glued part from loosening. or tape it with packaging tape. Be careful not to wash your vehicle within 24 hours.