Specification:
• Type: RF Transmitter 433 Mhz Remote Controls
• Wireless Communication: RF
• Use: Universal, Lighting, Electric Door, Automated curtains, Switch
• Input Voltage: 12 V
• RF working mode: Superheterodyne
• Receiver sensitivity: > 97 dBm
• Transmitting distance:> 100 m ( open space)
• Decoding mode: MCU software decoding
• Remote storage: 20
• Support remote type: EV1527 learning code
• Working mode: Momentary, toggle, latching time delay (5s,10s,15s )
• Output terminal: NO, NC, COM
• Remote control battery: 2 x 3 V CR2016 button batteries
• Support remote type: EV1527 learning code
• Application 1 for Family, Farm, Factory, Office, Supermarket
• Application 2 for Garage, Light, Automated curtains, Fan, Door, Gate, LED, Lamps, Motor
Note: Maximum input power is 250 V
Operating Function Description
(1) Code learning operation
Inching learning code: After the controller is connected to the power, briefly press the learning code button (the light flashes once), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate a successful learning code, and the working mode is inching mode.
Self-locking code learning: After the controller is connected to the power, briefly press the code learning button twice (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful code learning, and the working mode is automatic mode.
Interlocking code learning: After the controller is connected to the power, briefly press the code learning button three times (press once to flash the light once), and then long press and hold one button on the remote control for 3 seconds (such as key A). The controller indicator light flashes and remains on, and then press another button on the remote control (such as key B). The controller indicator light flashes to indicate successful code learning, and the working mode is interlocking mode (such as AB interlocking).
Delay for 5 seconds to learn code: After the controller is connected to the power, briefly press the learn code button four times (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 5 seconds.
Delay of 10 seconds for learning code: After the controller is connected to the power, briefly press the learn code button five times (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate a successful learning code, and the working mode is automatic shutdown mode with a delay of 10 seconds.
Delay for 15 seconds to learn code: After the controller is connected to the power, briefly press the learn code button six times (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 15 seconds.
Delayed code learning by 20 seconds: After the controller is connected to the power, briefly press the code learning button seven times (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 20 seconds.
(2) Clear code operation
Press and hold the learn code button on the controller for 5 seconds until the indicator light flashes, indicating successful code clearing.
(3) Clear code operation
Jog mode: After learning the code for a single button on the remote control, press the button relay to engage, and release the button relay to disconnect.
Self-locking mode: After learning the code for a single button on the remote control, press the button relay once to engage and then press the button relay again to disconnect.
Interlock mode: After learning the codes for the two buttons on the remote control, press the A key to activate the relay, and press the B key to deactivate the relay.
Delay mode: After learning the code for a single button on the remote control, press the button relay to engage, and after the delay, it will automatically disconnect.
Feature: 1RF 433 Mhz Universal Gate Remote Control Switch
Feature 2: 1527 Learning Code Transmitter
Feature 3: For Garage controller
Feature 4: DIY Kit Remote Control
Feature 5: for Water Pump Motor LED/Electric Appliance
Feature 6: RF Transmitter 433 Mhz Remote Controls
Feature 7: For Led Lights Bulb DIY
Feature 8: For Door Electromagnetic lock
Feature 9: Rf Receiver Transmitter
Feature 10: 12v remote control switch
Feature 11: 12v remote relay
Feature 12: 12v remote control module
Feature 13: 12v rf switch
Feature 14: diy wireless switch dc control
Feature 15: wireless fan controller
Feature 16: wireless relay receiver module
Feature 17: 1ch relay module
Feature 18: 12v relay with remote
Feature 19: Mini relay with remote control
Feature 20: relay transmitter
Feature 21: DIY Kit control remoto
