Coolbe: The information about the product is provided by the seller. Notwithstanding any of this information, the product is not intended for diagnosis, cure, mitigation, treatment or prevention of any disease, is not a drug or a medical device, and should not be used for any medical purposes. Please consult a medical specialist.
-----
Description:
This complete kit includes low speed handpiece contra angle model, low speed handpiece straight model and low speed dental air motor.
Features:
- E-type connector;
- Wrench type;
- Precise technology, Steady, no vibration while revolving, offering a steady operation;
- Suitable for any E-type handpiece accords with ISO standard;
- 135 celsius degree Autoclavable, suitable for both steam and chemical autoclave.
Contra angle handpiece:
- Low Speed 22,000-27,000 rpm.
- The shank of the instrument mounted therein is 2.35 mm.
- Fastening of the instruments with a turning latch.
- Autoclavable 135 celsius degree.
- For any lab or E-type motors.
Straight Nose cone:
- Working pressure: 0.3MPa (2-hole);
- 0.25MPa (2-hole) (Measure meter is installed at the end of air motor to measure the air pressure).
- Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise).
- Noise: lower than 68dB.
- Air consumption: about 56L/min.
- Ratio: 1:1.
- Max speed of contra angle: 25000rpm/min.
Air Mortor:
- Supply air pressure: 245-392KPa (2.5-4kgf/CM2);
- 1:1 Direct Drive;
- 2 holes;
- Max speed 20,000 min-1;
Specifications:
As picture shows.
Packing List:
1 x E-type air motor 2-Hole,
1 x Straight nose cone,
1 x Contra Angle handpiece,
1 x Water spray nozzle,
1 x Oil spray nozzle,
1 x CAP Spanner,
1 x English manual.
