Feature:
1. Can be wiped cleaning with swab, paper towel, can directly wipe clean by using non‑metal incisive objects.
2. Highlight inner wall, easy to demold, make the DIY lipstick making more smoothly.
3. Each part of the inner wall is polished to ensure a high gloss finish, fine details.
4. DIY lipstick mold, easy to operate, you can modulate colors you like, assuring the ingredients safe.
5. Aviation aluminum material making makes it easy to clean, wear resistant, high strength.
Specification:
.Item Type: DIY Lipstick Mold
Material: Aluminum
Color: Rose Gold
1. Cleaning steps: open the mold, soak it in vegetable oil or kerosene for a day, and then clean and dry it with flexible cleaning solution before installation and use.If there are still black patches in the process of use, you can clean them again or do it several times with the test lipstick material until there is no black patches. 2. Caution: Do not use hard objects or steel ball to scrub.Be careful not to scratch your hands when cleaning the mold cavity.3. Note: after use, wipe with vegetable oil and sealing it for preservation. Try to avoid repeated cleaning. Placed in a ventilated and dry place, can be oiled maintenance, not hot water, can not be boiled in the pot
The correct lipstick making process:1. Combine the upper and lower molds2. Heat the material proportionally until it is completely dissolved3. Pour the original lipstick solution into the mold hole and let it stand for more than 30 minutes. If possible, put it in the refrigerator for better cooling effect (20 minutes).4. After the lipstick becomes solid, clean up the spilled lipstick, and then gently remove the upper cover upward to ensure that the lipstick strip does not pull out with the cover at the bottom of the mold.Note: (if the lipstick is not easy to come off the mold, please use the mold remover or other tools to gently press.)5. Rotate the lipstick tube to the top, press down on the lipstick strip, press down to the bottom and draw it out parallel to the mold.
Moisturizing lipstick: 4 grams of beeswax, 12 grams of olive oil, 1.25 grams of color powder and other basic wax oil proportion control in 1 to 3 is appropriate. Replace the beeswax if it is difficult to pull out the mold.
Special note: pay attention to temperature, dosage of ingredients and process, the temperature is too low, can produce horizontal grain, high temperature could be bubbles, cracks, or holes, more need to pay attention to while doing double color lipstick and related production technology and ingredients, the general lipstick sales businesses will provide, will be available when the material to the other party.
Hint: When the weather is hot, the finished product should be made at room temperature, which will be affected when demoulding. It is suggested to put it in the refrigerator to cool.
Correct mold maintenance method:After getting the mold, first soak it in cosmetic white oil or olive oil, and then wipe the mold with a cotton swab to keep the mold dry.Be sure to wipe with a cotton swab or suck the oil dry way can not wipe hard, because friction is easy to make the mold black, when cleaning the mold, excessive force, resulting in friction, and finally the mold blackWhen cleaning, be careful not to use water or any mold cleaning agent, which will also damage the surface aluminum, resulting in damage to the mold and service life
Package List:
1 x Mold Base 1 x Mold 1 x Right Angle Wrench
